[Please refer to the following instructions-for heat press]
1. It is recommended to set the printer "photo quality inkjet paper" model to get the best image quality printing effect.
2. Select the color and size of the printed pattern, set a mirror for printing, and print the pattern on the thermal transfer paper to use the face correctly (printing). Our transfer paper does not have any requirements for ink, and any brand of ordinary dye ink, pigment ink, etc.can be used. But like branding ink (paint ink), it is best to be waterproof.
3. After the printing transfer paper is dry, cut out the image, you need to design an area of at least 0.2 inches around the edge.
Thermal printing transfer
1. When the fabric pressure is level, when thermal printing is required, place it on the thermal transfer paper and face down to the thermal printing position.
2. Please set the transfer temperature to about 180 degrees, the hot stamping time of the branding machine is 25 seconds, and the printing surface of the transfer paper and clothing. Place under the pressure plate after anastomosis.
3. For irons, please preheat to the highest set temperature (about 2 to 3 minutes), do not use the steam function. Slow down when hot stamping to every corner and edge